Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch * M18 DIN-sized cylindrical housing * Housing materials: plastic, nickel plated brass and stainless steel * Axial and radial types (with integrated 90-optics) * Enclosure rating IP67 * DC switching types with connectors for easy maintenance * Full metal plug-in type * Sensing distance separate types: 7 m, 10 m * Retroreflective polarizing types: 2 m, 4 m * Background suppression type: 10 cm * Long detection distance (0.3 m, 1 m) with sensitivity adjuster for diffuse type * Wide-beam characteristics (10 cm) for diffuse type * Wide operating voltage range (10 to 30 VDC or 24 to 240 VAC) * Short-circuit and reverse connection protection (DC switching type) * UL and CSA approved (AC switching types) * UL listed (DC switching types) Photoelectric Sensors E3F2 1 Ordering Information DC-Switching Models Housing Material: Plastic Note: Shaded models are normally stocked. Sensing method Appearance Multi purpose Through-beam pre-wired Sensing distance 7m M12 connector - precision detection (*1) - test input axial Polarizing (with MSR function) pre-wired 10 m M12 connector Non-polarizing (without MSR function) Retroreflective (incl. reflector E39-R1 or E39-R1S) Connection method pre-wired M12 connector Fixed sensitivity pre-wired Adjustable sensitivity axial M12 connector NPN output E3F2-7B4 E3F2-7C4 E3F2-7B4-P1 E3F2-7C4-P1 E3F2-10B4 E3F2-10C4 E3F2-10B4-P1 E3F2-10C4-P1 0.1 - 2 m(*2) E3F2-R2B4 E3F2-R2B4-P1 E3F2-R2C4 0.1 - 4 m(*3) E3F2-R4B4F E3F2-R4B4F-P1 E3F2-R4C4F E3F2-R2C4-P1 E3F2-R4C4F-P1 pre-wired E3F2-R4B4 E3F2-R4C4 M12 connector E3F2-R4B4-P1 E3F2-R4C4-P1 pre-wired Polarizing (with MSR function) Model PNP output M12 connector 0.1 - 2 m(*2) E3F2-R2RB41 E3F2-R2RB41-P1 E3F2-R2RC41 E3F2-R2RC41-P1 radial Fixed sensitivity Wide-beam characteristics M12 connector Adjustable sensitivity pre-wired pre-wired axial Diffuse reflective 0.1 m 0.3 m M12 connector pre-wired 1m M12 connector Adjustable sensitivity pre-wired 0.3 m M12 connector E3F2-DS10B4-N E3F2-DS10C4-N E3F2-DS10B4-P1 E3F2-DS10C4-P1 E3F2-DS30B4 E3F2-DS30C4 E3F2-DS30B4-P1 E3F2-DS30C4-P1 E3F2-D1B4 E3F2-D1C4 E3F2-D1B4-P1 E3F2-D1C4-P1 E3F2-DS30B41 E3F2-DS30C41 E3F2-DS30B41-P1 E3F2-DS30C41-P1 E3F2-LS10B4 E3F2-LS10C4 E3F2-LS10B4-P1 E3F2-LS10C4-P1 radial pre-wired Fixed sensing distance Background suppression M12 connector 10 cm axial *1) with slit E39-ES18 *2) with reflector E39-R1 *3) with reflector E39-R1S Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable (e.g. E3F2-R2RB4 2M or E3F2-R2RB4 5M). For other cable length please contact your OMRON sales representative. 2 Photoelectric Sensors E3F2 Housing material: Metal (Nickel plated brass) Note: Shaded models are normally stocked. Sensing method Appearance Through-beam Multi purpose Connection method pre-wired Sensing distance 7m M12 connector - precision detection - test input Retroreflective (incl. reflector E39-R1) Polarizing (with MSR function) pre-wired axial Fixed sensitivity M12 connector pre-wired M12 connector pre-wired Adjustable sensitivity axial M12 connector NPN output E3F2-7B4-M E3F2-7C4-M E3F2-7B4-M1-M E3F2-7C4-M1-M E3F2-10B4-M E3F2-10C4-M E3F2-10B4-M1-M E3F2-10C4-M1-M 0.1 - 2 m(*1) E3F2-R2RB4-M E3F2-R2RB4-M1-M 0.1 - 4 m(*2) E3F2-R4B4F-M E3F2-R4B4F-M1-M E3F2-R2RC4-M E3F2-R2RC4-M1-M E3F2-R4C4F-M E3F2-R4C4F-M1-M pre-wired E3F2-R4B4-M E3F2-R4C4-M M12 connector E3F2-R4B4-M1-M E3F2-R4C4-M1-M pre-wired Polarizing (with MSR function) 10 m Model PNP output 0.1 - 2 m (*1) E3F2-R2RB41-M E3F2-R2RC41-M radial Diffuse reflective pre-wired Fixed sensing distance Wide-beam characteristics Adjustable sensing distance 0.1 m M12 connector pre-wired axial 0.3 m M12 connector pre-wired 1m M12 connector pre-wired Adjustable sensing distance 0.3 m M12 connector E3F2-DS10B4-M E3F2-DS10C4-M E3F2-DS10B4-M1-M E3F2-DS10C4-M1-M E3F2-DS30B4-M E3F2-DS30C4-M E3F2-DS30B4-M1-M E3F2-DS30C4-M1-M E3F2-D1B4-M E3F2-D1C4-M E3F2-D1B4-M1-M E3F2-D1C4-M1-M E3F2-DS30B41-M E3F2-DS30C41-M E3F2-DS30B41-M1-M E3F2-DS30C41-M1-M E3F2-LS10B4-M E3F2-LS10C4-M E3F2-LS10B4-M1-M E3F2-LS10C4-M1-M radial Background suppression pre-wired Fixed sensing distance M12 connector 10 cm axial *1) with reflector E39-R1 *2) with reflector E39-R1S Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable (e.g. E3F2-R2RB4 2M or E3F2-R2RB4 5M). For other cable length please contact your OMRON sales representative. Photoelectric Sensors E3F2 3 Housing material: Metal (Stainless steel) Note: Shaded models are normally stocked. Sensing method Appearance Through-beam Connection method pre-wired axial Retroreflective (incl. reflector E39-R1) Polarizing (with MSR function) Diffuse reflective Fixed sensitivity Wide-beam characteristics 7m M12 connector pre-wired M12 connector axial Adjustable sensitivity Sensing distance pre-wired 0.1 m pre-wired 0.3 m M12 connector NPN output E3F2-7B4-S E3F2-7C4-S E3F2-7B4-M1-S E3F2-7C4-M1-S 0.1 - 2 m E3F2-R2RB4-S (with E3F2-R2RB4-M1-S reflector E39-R1) M12 connector axial Model PNP output E3F2-R2RC4-S E3F2-R2RC4-M1-S E3F2-DS10B4-S E3F2-DS10C4-S E3F2-DS10B4-M1-S E3F2-DS10C4-M1-S E3F2-DS30B4-S E3F2-DS30C4-S E3F2-DS30B4-M1-S E3F2-DS30C4-M1-S Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable (e.g. E3F2-R2RB4-S 2M or E3F2-R2RB4-S 5M). For other cable length please contact your OMRON sales representative. AC-Switching Models Housing material: Plastic Note: Shaded models are normally stocked. Sensing method Appearance Through-beam Connection method pre-wired Sensing distance 3m Model Light-ON E3F2-3Z1 Dark-ON E3F2-3Z2 axial Retroreflective (incl. reflector E39-R1) Non-polarizing (without MSR function) Diffuse reflective Fixed sensing distance Wide-beam characteristics pre-wired axial pre-wired 0.1 - 2 m E3F2-R2Z1 (with reflector E39-R1) 0.1 m E3F2-DS10Z1-N E3F2-R2Z2 E3F2-DS10Z2-N axial Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable (e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative. 4 Photoelectric Sensors E3F2 Accessories (Order Separately) Note: Shaded models are normally stocked. Name Reflectors Sensing distance (typical) [1.] Model Remark 0.1 - 3.7 m (axial) 0.1 - 2.4 m (radial) E39-R1 60 x 40 mm (included in some models) 0.1 - 4.3 m (axial) E39-R1S for E3F2-R4 0.1 - 4.2 m (axial) 0.1 - 2.7 m (radial) E39-R7 84 mm 0.1 - 5.3 m (axial) 0.1 - 3.1 m (radial) E39-R8 100 x 100 mm 0.1 - 4.3 m (axial) E39-R40 80 x 80 mm E39-RSA 35 x 10 mm E39-RSB 35 x 40 mm E39-RS3 80 x 70 mm Tape Reflectors Lens Cap E39-F31 Mounting Bracket Y92E-B18 screw mount Y92E-G18 quick access mounting E39-ES18 for E3F2-10@ - precision detection Slit For detailed information about Accessories, refer to the main chapter "Accessories" at the end of the document. Note: 1. Typical sensing distance corresponds to 80% of the max. sensing distance. For details, please refer to "Engineering Data". Sensor I/O Connectors Note: Shaded models are normally stocked. Cord Shape Standard Straight L-shaped Vibration-proof robot cable Cable type 2m Straight L-shaped Four-wire type Model XS2F-D421-D80-A 5m XS2F-D421-G80-A 2m XS2F-D422-D80-A 5m XS2F-D422-G80-A 2m XS2F-D421-D80-R 5m XS2F-D421-G80-R 2m XS2F-D422-D80-R 5m XS2F-D422-G80-R Photoelectric Sensors E3F2 5 Specifications Ratings / Characteristics of DC Switching Models Item E3F2-7@ Sensing method Power supply voltage Current consumption Rated sensing distance [1.] E3F2-10@ E3F2-R2@4-@ E3F2-R2R@ E3F2-R4@-@ E3F2-DS10@ E3F2-DS30@ Through-beam - multi - Precision purpose detection [6.] - test input 10 to 30 V DC 12 to 24 V DC 50 mA max. 7m 10 m Typical sensing distance - for different reflector types (ref. to accessories) [2.] Standard object Directional angle Differential travel (hysteresis) Black/white error Response time Control output Power reset time Ambient illumination Ambient temperature Ambient humidity Insulation resistance Dielectric strength Vibration resistance Shock resistance Enclosure ratings Light source Indicators Sensitivity adjustment Connection method Test Input Operation mode Weight (approx.) Plastic pre-wired (2 m) case connector Metal pre-wired (2 m) case connector Circuit protection Housing materials Retroreflective Nonpolarizing 4.0 m E39-R1: 3.7 m 4.5 m axial 5.3 m radial 2.4 m E39-R7: axial 4.2 m radial 2.7 m E39-R8: axial 5.3 m radial 3.1 m Opaque: 56 mm dia. min. E39-R1: E39-R7: E39-R8: Opaque: 11 mm dia. min. 3 to 20 - Diffuse reflective Wide beam Adjustable sensing distance characteristic Polarizing 10 to 30 V DC 25 mA max. 30 mA max. 0.1 - 2 m (with reflector E39-R1) 0.1 - 4 m (with reflector E39-R1S) 25 mA max. 0.1 m (5 x 5 cm white mat paper) 30 mA max. 0.3 m (10 x 10 cm white mat paper) 1m (30 x 30 cm white mat paper) E3F2LS10@4-@ Background suppression 0.1 m (10 x 10 cm white mat paper) E39-R1S:4.3 m - E39-R7: 4.8 m E39-R8: 5.6 m E39-R40: 4.3 m E39-RS3: 2 m - - 20% max. 5% max - Operation and Reset: 2.5 ms max. 1 ms max 2.5 ms max. Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.) 50 ms 100 ms max. 50 ms Incandescent lamp: 3000 lx max. / Sunlight: 10000 lx max. Operating: -25 to 55 C / Storage: -30 to 70 C (with no icing or condensation) Operating: 35% to 85% / Storage: 35% to 95% (without condensation) 20 M min. at 500 V DC between energized parts and case 1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case 10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z) Destruction: 500 m/s2 each direction (X, Y, Z) IP67 [3.]; NEMA 1, 2, 4 Infrared LED (880 nm/850 nm) E3F2D1@4-@ Red LED (660 nm) 3% 1 ms max. 100 ms Red LED (660 nm) Light incident Output Light incident / power Light incident Light incident / power indicator Light incident Output / power indi- (orange) / indicator for light source (red) (red) / for light source (red) (red) / indicator cator for light light emission stability (green) stability (orange) / stasource (red) (red) (green) bility (green) Fixed Fixed / Fixed Adjustable Fixed Adjustable 2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12) [4.]) or M12-connector - [7.] - Light-ON or Dark-ON selectable by wiring 120 g 60 g 40 g 20 g 180 g 90 g 120 g 50 g Output short-circuit and power supply reverse polarity Plastic (case: ABS; lens: PMMA) Nickel brass Nickel brass - Nickel brass Stainless - - Stainless steel [5.] steel [5.] Nickel brass - Infrared LED (880 nm) Nickel brass Stainless steel [5.] Nickel brass Stainless steel [5.] Nickel brass - Nickel brass - Note: 1. For stable sensing distance in detail, please refer to "Engineering Data" 2. Typical sensing distance corresponds to 80% of the max. sensing distance. 3. The enclosure rating IP67 of OMRON internal standards correspond to stricter test requirements than the standard IEC 60529 (refer to chapter "Precautions") 4. For other cable materials (e.g. PUR) please contact your OMRON sales representative. 5. Material-specification for stainless steel housing case: 1.4305 (W.-No.), 303 (AISI), 2346 (SS). For other stainless steel materials please contact your OMRON sales representative. 6. with slit E39-ES18 7. PNP models -B4: VCC to VCC -2.5 V: Emitting OFF (Source current: 3 mA max.) / Open or 0 to 2.5 V: Emitting ON (Leakage current: 0.1 mA max.) NPN models -C4: 0 to 2.5 V: Emitting OFF (Source current: 3 mA max.) / Open or Vcc to Vcc -2.5 V: Emitting ON (Leakage current: 0.1 mA max.) 6 Photoelectric Sensors E3F2 Ratings / Characteristics of AC Switching Models Item Sensing method E3F2-3Z1 E3F2-3Z2 Through-beam E3F2-R2Z1 E3F2-R2Z2 Non-polarizing Retroreflective E3F2-DS10Z1 E3F2-DS10Z2 Diffuse reflective (wide-beam characteristic) Power supply voltage 24 to 240 VAC 10%, 50 / 60 Hz Current consumption 10 mA max. 5 mA max. Rated sensing distance[1.] 3m 0.1 - 2 m (with reflector E39-R1) 0.1 m (5 x 5 cm white mat paper) Typical sensing distance for different reflector types [2.] - E39-R1: 3,4 m E39-R7: 3,9 m E39-R8: 5,2 m - Detectable object Opaque object: 11 mm min. Opaque object: 56 mm min. Directional angle 3 to 20 - Differential travel - 20% max. Response time 30 ms max. Control output AC solid state (SCR) 200 mA max.; residual voltage: 5 V max. at 200 mA Opaque objects Power reset time 100 ms Ambient illumination Incandescent lamp: 3000 lx max. Sunlight: 10000 lx max. Ambient temperature Operating: -25 to 55 C / Storage: -30 to 70 C (with no icing or condensation) Ambient humidity Operating: 35% to 85% / Storage: 35% to 95% (without condensation) Insulation resistance 20 M min. at 500 V DC between energized parts and case Dielectric strength 1500 VAC, 50 / 60 Hz for 1 min between energized parts and case Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z) Shock resistance 500 m/sqr (approx. 50 g) for each direction (X, Y, Z) Enclosure rating IP67 [3.]; NEMA 1, 2, 4 Light source Infrared LED (880 nm) Indicators Light incident/power indicator for light source (red) Sensitivity adjustment Fixed Connection method 2 m, 5 m pre-wired cable (PVC dia. 4 mm (14 / 0.15)) Operation mode Light-ON or Dark-ON (fixed) Circuit protection None Weight (approx.) 110 g (pre-wired 2 m cable) Housing materials Plastic (case: ABS; lens: PMMA) Note: 1. For stable sensing distance in detail, please refer to "Engineering Data" 2. Typical sensing distance corresponds to 80% of the max. sensing distance. 3. The enclosure rating IP67 of OMRON internal standards correspond to stricter test requirements than the standard IEC 60529 (refer to chapter "Precautions") Photoelectric Sensors E3F2 7 Engineering Data (Typical) Operating Range (typical) Through-beam Models (axial) E3F2-7@4-@ Through-beam Models (axial) E3F2-3Z@ Through-beam Models (axial) E3F2-10@ 500 300 typical sensing distance: 3.8 m 400 300 Distance Y (mm) Distance Y (mm) 200 100 0 -100 -400 Y X 0 200 1 2 3 300 5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 1415 16 17 Distance X (m) 4 Distance X (m) Retroreflective Models (axial) E3F2-R2R@4-@ (polarizing) and reflectors 200 typical sensing distances: E39-R1: 3.4 m E39-R7: 3.9 m E39-R8: 5.2 m 200 Y X -500 Retroreflective Models (axial) E3F2-R2Z@ (non polarizing) and reflectors typical sensing distances: E39-R1: 4.0 m E39-R7: 4.5 m E39-R8: 5.3 m 0 -100 -300 -300 300 100 -200 -200 Retroreflective Models (axial) E3F2-R2@4-@ (non polarizing) and reflectors 200 typical sensing distances: E39-R1: 3.7 m E39-R7: 4.2 m E39-R8: 5.3 m 150 0 -100 Distance Y (mm) Distance Y (mm) Distance Y (mm) 100 100 100 0 -100 50 0 -50 -100 -200 -200 Reflector Y Y X -300 -300 0 1 2 3 4 5 6 7 8 0 1 2 3 4 Distance X (m) 200 6 7 8 Retroreflective Models (radial) E3F2-R2R@41-@ (polarizing) and reflectors 100 Typical sensing distance E39-RS3 E39-R1S E39-R40 E39-R7 E39-R8 typical sensing distances: E39-R1: 2.4 m E39-R7: 2.7 m E39-R8: 3.1 m 50 100 Distance Y (mm) Distance Y (mm) 150 5 50 0 - 50 - 100 0 -50 - 150 - 200 Y Reflector - 250 0 1 2 3 4 5 6 7 Reflector -100 8 9 Distance X (m) 8 Y X X Photoelectric Sensors E3F2 0 0.5 1 1.5 2 2.5 3 -150 Y 3.5 4 Distance X (m) Reflector X -200 Distance X (m) Retro-reflective Models (axial) E3F2-R4@4@-@ (polarizing) 250 Reflector X 0 1 2 3 4 5 6 7 Distance X (m) Diffuse reflective Models (axial) E3F2-DS10@4-@ (wide-beam type) Diffuse reflective Models (axial) E3F2-DS10Z-@ (wide-beam type) 15 Diffuse reflective Models (axial) E3F2-DS30@4-@ 40 30 Sensitivity adjusted to maximum Sensitivity adjusted to 400 mm 30 10 20 white paper (50 x 50 mm) 0 -5 Distance Y (mm) Distance Y (mm) Distance Y (mm) 20 5 10 white paper (50 x 50 mm) 0 -10 10 white paper (100 x 100 mm) 0 -10 -20 -10 Sensing distance adjustable between 0 and 550 mm -20 Y Object Y Object -30 20 40 60 80 100 120 140 0 20 40 60 80 Distance X (mm) Diffuse reflective Models (radial) E3F2-DS30@41-@ Object X -40 -30 0 Y X X -15 100 120 140 0 100 200 Distance X (mm) 300 400 500 600 Distance X (mm) Diffuse reflective Models (axial) E3F2-D1@4-@ 100 40 Sensitivity adjusted to 390 mm 80 White paper (90% reflectivity) 30 60 10 Sensing object: 100 x 100 mm 0 -10 Distance Y (mm) Distance Y (mm) 20 40 20 Sensing object: 300 x 300 mm 0 -20 -40 -20 -60 -30 Y Object Y -80 X 0 Object X -40 100 200 300 400 500 -100 0 200 400 600 800 1000 1200 1400 1600 Distance X (mm) Distance X (mm) Excess Gain Ratio vs. Distance (typical) Through-beam Models (axial) E3F2-7@4-@ Through-beam Models (axial) E3F2-3Z@ Through-beam Models (axial) E3F2-10@ 100 100 10 relative Gain 10 Excess gain Excess gain 100 1 1 0.1 0.1 0 2 4 6 8 10 12 Distance X (m) 10 1 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Distance X (m) Photoelectric Sensors Distance [m] E3F2 9 Retroreflective Models (axial) E3F2-R2@4-@ (non polarizing) and reflectors Retroreflective Models (axial) E3F2-R2Z@ (non polarizing) and reflectors Retroreflective Models (axial) E3F2-R2R@4-@ (polarizing) and reflectors 10 10 10 reflector E39-R1 Excess gain 100 Excess gain 100 Excess gain 100 reflector E39-R1 1 1 0.1 0.1 1 2 3 4 5 6 7 0.1 0 8 1 2 3 4 5 6 7 0 1 2 3 Distance X (m) Distance X (m) Retroreflective Models (axial) E3F2-R4@4@-@ 4 5 6 7 Distance X (m) Retroreflective Models (radial) E3F2-R2R@41-@ (polarizing) and reflectors 100 100 Reflectors: E39-RS3 E39-R1S E39-R40 E39-R7 E39-R8 Excess gain 10 Excess Gain reflector E39-R8 reflector E39-R8 reflector E39-R8 0 reflector E39-R7 1 reflector E39-R7 reflector E39-R7 reflector E39-R1 1 10 reflector E39-R1 1 reflector E39-R7 reflector E39-R8 0.1 0.1 0 2 4 6 8 10 0 1 2 3 Distance X (m) Diffuse reflective Models (axial) E3F2-DS10@4-@ (wide-beam type) 5 Diffuse reflective Models (axial) E3F2-DS10Z-@ (wide-beam type) Diffuse reflective Models (axial) E3F2-DS30@4-@ 100 100 100 White paper (90% reflectivity) Grey paper (18% reflectivity) 10 Excess gain Excess gain 10 1 Sensitivity adjusted to maximum Sensing object: 100 x 100 mm Sensing object: 50 x 50 mm Sensing object: 50 x 50 mm Excess gain 4 Distance X (m) White paper (90% reflectivity) 1 10 White paper (90% reflectivity) 1 Grey paper (18% reflectivity) 0.1 0.1 0 20 40 60 80 100 120 140 Distance X (mm) 10 Grey paper (18% reflectivity) Photoelectric Sensors E3F2 0.1 0 50 100 150 200 Distance X (mm) 0 200 400 600 800 1000 Distance X (mm) Diffuse reflective Models (radial) E3F2-DS30@41-@ Diffuse reflective Models (axial) E3F2-D1@4-@ 100 100 Sensing object: 100 x 100 mm 10 Excess gain Excess gain Sensitivity adjusted to 390 mm White paper (90% reflectivity) 1 10 1 Grey paper (18% reflectivity) 0.1 0 100 200 300 400 0,1 500 0 0.5 1 1.5 Distance X (mm) 2 Distance(m) Light spot vs. sensing distance Incline (left and right) Incline (up and down) Background suppression Models E3F2-LS@ Background suppression Models E3F2-LS@ 20,00% Sensing Distence movement (%) 4 2 Sensing Distence movement (%) 20,00% 6 Spot diameter(mm) Background suppression Models E3F2-LS@ 10,00% 0,00% -10,00% 0 50 100 150 0,00% -10,00% -20,00% -20,00% 0 10,00% -40 -30 -20 -10 0 10 20 30 40 -40 -30 -20 -10 0 10 20 30 40 Incline Angle () Incline Angle () Distance(mm) Object material vs. sensing distance Background suppression Models E3F2-LS@ 120,0 Sensing Distance(mm) 100,0 80,0 60,0 40,0 20,0 0,0 white corrugated paper black SUS mirror Photoelectric Sensors E3F2 11 Operation Output Circuits Structure of Sensor I/O Connector Classification DC Wire color Brown White Blue Black Connector pin No. Use 1 Power supply (+V) 2 Mode selection Lon/Don 3 Power supply (0 V) 1 2 3 4 XS2F-D42#-D80-# XS2F-G42#-G80-# Output 4 Brown White Blue Black PNP Output Model Output transistor status E3F2-@B4-@ (except for E3F2-10B4-@ and E3F2-LS10B4-@) - Timing chart - Connection method - Output circuit Through-beam emitter Brown 10 to 30 VDC 1 Power indicator (red) Main circuit Blue 3 0V Connector Pin Arrangement 1 2 4 3 ON when light is incident. (Light-ON) Incident Interrupted Output indicator (red) Output transistor Load (relay) ON OFF ON OFF Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Light indicator Red Brown Stability indicator* 10 to 30 VDC 1 ZD Green Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. Load 3 Operate Release 0V Pink Mode selection 2 Connector Pin Arrangement 1 * Only on models E3F2-R4B4-@ and E3F2-D1B4-@ ON when light is interrupted. (DarkON) Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Load (relay) Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. Light indicator Red 2 4 3 Brown Stability indicator* 10 to 30 VDC 1 Green Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. 3 Operate Release 0V Pink 2 Mode selection Connector Pin Arrangement * Only on models E3F2-R4B4-@ and E3F2-D1B4-@ 12 Photoelectric Sensors E3F2 1 2 4 3 Load Model Output transistor status E3F2-10B4-@ - ON when light is incident. (Light-ON) Timing chart Connection method - Test input ON OFF Light emission ON OFF Indicator ON OFF Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Load (relay) Output circuit Through-beam emitter Red Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Brown Output indicator 10 to 30 VDC 1 ZD Orange Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. Load 3 Operate Release 0V Pink Mode selection 2 Connector Pin Arrangement 1 2 4 3 ON when light is interrupted. (DarkON) Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. Brown Output indicator 10 to 30 VDC 1 Orange Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. Load 3 Load (relay) Operate Release 0V Pink Mode selection 2 Connector Pin Arrangement 1 2 4 3 E3F2-LS10B4-@ ON when light is incident. (Light-ON) Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Load (relay) Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Output indicator Orange Brown Stability indicator* 10 to 30 VDC 1 ZD Green Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. Load 3 Operate Release 0V Pink Mode selection 2 Connector Pin Arrangement 1 2 4 3 ON when light is interrupted. (DarkON) Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Load (relay) Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. Output indicator Orange Brown Stability indicator* 10 to 30 VDC 1 Green Black 4 Main circuit ZD: VZ = 36 V Blue 100 mA max. 3 Operate Release Load 0V Pink 2 Mode selection Connector Pin Arrangement 1 2 4 3 Note: Terminal numbers for connector type. Photoelectric Sensors E3F2 13 NPN Output Model Output transistor status E3F2-@C4-@ (except for E3F2-10C4-@ and E3F2-LS10C4-@) - Timing chart Connection method - Output circuit Through-beam emitter Brown 10 to 30 VDC 1 Power indicator (red) Main circuit Blue 3 0V Connector Pin Arrangement 1 2 4 3 ON when light is incident. (Light-ON) Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Load (relay) Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Output indicator Red Output indicator (red) ON OFF Output transistor ON OFF Load (relay) ON when light is incident. (Light-ON) ON OFF Light emission ON OFF Indicator ON OFF Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Load (relay) 0V Pink Mode selection 2 Connector Pin Arrangement Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. 1 2 4 3 Brown Stability indicator* Output indicator 10 to 30 VDC 1 Green Red 100 mA max. Black 4 Main circuit Load Blue 3 0V ZD: VZ = 36 V Pink Mode selection 2 Connector Pin Arrangement - Test input Blue 3 Operate Release - Load ZD: VZ = 36 V 1 * Only on models E3F2-R4C4-@ and E3F2-D1C4-@ E3F2-10C4-@ 100 mA max. Black 4 Main circuit Operate Release Incident Interrupted 10 to 30 VDC 1 Green * Only on models E3F2-R4C4-@ and E3F2-D1C4-@ ON when light is interrupted. (DarkON) Brown Stability indicator* 2 4 3 Through-beam emitter Red Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Brown Light indicator 10 to 30 VDC 1 Orange Main circuit Load 100 mA max. Black 4 Blue 3 0V ZD: VZ = 36 V Pink Mode selection 2 Operate Release Connector Pin Arrangement 1 2 4 3 ON when light is interrupted. (DarkON) Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. Brown Light indicator 10 to 30 VDC 1 Orange 100 mA max. Black 4 Main circuit Load Blue 3 0V ZD: VZ = 36 V Pink Load (relay) Operate Release 2 Connector Pin Arrangement 1 2 4 3 14 Photoelectric Sensors E3F2 Mode selection Model Output transistor status E3F2-LS10C4-@ ON when light is incident. (Light-ON) Timing chart Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Connection method Connect the pink (Pin 2 ) and brown (Pin 1 ) cords or open the pink cord (Pin 2 ). Output circuit Output indicator Orange Brown Stability indicator* 10 to 30 VDC 1 Green Main circuit Load 100 mA max. Black 4 Blue 3 0V ZD: VZ = 36 V Pink Load (relay) Mode selection 2 Operate Release Connector Pin Arrangement 1 2 4 3 ON when light is interrupted. (DarkON) Incident Interrupted Output indicator (orange) ON OFF Output transistor ON OFF Connect the pink (Pin 2 ) and blue (Pin 3 ) cords. Output indicator Orange Brown Stability indicator* 10 to 30 VDC 1 Green 100 mA max. Black 4 Main circuit Load Blue 3 0V ZD: VZ = 36 V Pink Operate Release Load (relay) Mode selection 2 Connector Pin Arrangement 1 2 4 3 Note: Terminal numbers for connector type. AC Output Model Output transistor status E3F2-3LZ - Timing chart - Connection method - Output circuit Through-beam emitter Brown Power indicator (red) Main circuit 24 to 240 VAC Blue E3F2-3Z1 E3F2-R2Z1 E3F2-DS10Z1-N ON when light is incident. (Light-ON) - Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Load (relay) E3F2-3Z2 E3F2-R2Z2 E3F2-DS10Z2-N ON when light is interrupted. (DarkON) Brown Light indicator Operate Release 200 mA max. Red Load Black - Main circuit 24 to 240 VAC Blue Incident Interrupted Output indicator (red) ON OFF Output transistor ON OFF Load (relay) Operate Release Photoelectric Sensors E3F2 15 Dimensions Note: All units are in millimeters unless otherwise indicated DC-Switching Models, plastic, axial type Cable type Connector type Without potentiometer E3F2-7@ E3F2-10@ E3F2-R2@4 E3F2-DS10@4-N E3F2-LS10@4 E3F2-R4@4F E3F2-7@-P1 E3F2-10@ -P1 E3F2-R2@4-P1 E3F2-DS10@4-P1 E3F2-LS10@4-P1 E3F2-R4@4F-P1 5 5 Light indicator 4 M12x1 6g 16.6 dia 24 optical area 24 22 6.2 22 optical area 4.7 dia 6.2 4 dia 42.3 37 73 62 42.3 37 4.8 dia 16.4 dia 64.9 Light indicator 4 M18x1 6g M18x1 6g 8 8 With potentiometer E3F2-DS30@4-P1 E3F2-D1@4-P1 4 8 Sensitivity adjustor Light indicator M18x1 6g 16 22 5 5 Photoelectric Sensors E3F2 optical area Sensitivity adjustor 4 8 Light indicator M18x1 6g 24 6.2 24 4.7 dia 22 6.2 16.4 dia optical area M12x1 6g 73 62 49.3 42.3 37 4.8 dia 4 dia 64.9 49.3 42.3 37 16.6 dia E3F2-DS30@4 E3F2-D1@4 DC-Switching Models, plastic, radial type Cable type Connector type Without potentiometer E3F2-R2R@41-P1 5 5 Light indicator 6.9 4 24 13.2 optical area 22 24 4.7 dia 22 4 dia 37 optical area 16.4 dia 42.3 13.2 64.9 73 62 42.3 37 4.8 dia M12x1 6g 16.6 dia E3F2-R2R@41 3.45 Light indicator 4 6.9 M18x1 6g 3.45 M18x1 6g 8 8 With potentiometer 4.7 dia 5 4 8 Sensitivity adjustor Light indicator 24 22 3.45 6.9 optical area 13.2 24 13.2 optical area M12x1 6g 73 62 49.3 42.3 37 22 4 dia 37 4.8 dia 16.4 dia 64.9 49.3 42.3 E3F2-DS30@41-P1 16.6 dia E3F2-DS30@41 5 Sensitivity adjustor 6.9 4 8 3.45 Light indicator M18x1 6g M18x1 6g Photoelectric Sensors E3F2 17 DC-Switching Models, metal (brass and stainless steel), axial type Cable type Connector type Without potentiometer E3F2-7@-S E3F2-7@-M1-M E3F2-10@-M1-M E3F2-R2R@4-M1-M E3F2-DS10@4-M1-M E3F2-LS10@4-M1-M E3F2-R4@4F-M1-M E3F2-R2R@4-S E3F2-DS10@4-S E3F2-7@-M1-S E3F2-R2R@4-M1-S E3F2-DS10@4-M1-S 76 4 4.8 dia M12x1 6g 65.5 42.3 37 optical area 24 6.2 27.7 24 4 Light indicator 6.2 optical area 27.7 16.4 dia 4.8 dia 4 dia 64.9 42.3 37 16.4 dia E3F2-7@-M E3F2-10@-M E3F2-R2R@4-M E3F2-DS10@4-M E3F2-LS10@4-M E3F2-R4@4F-M Light indicator M18x1 6g M18x1 6g With potentiometer E3F2-DS30@4-M1-M E3F2-R4@4-M1-M E3F2-D1@4-M1-M 37 Sensitivity adjustor Light indicator M18x1 6g 27.7 4 Sensitivity adjustor Light indicator M18x1 6g 18 Photoelectric Sensors optical area E3F2 6.2 24 4.8 dia 16.4 dia 49.3 42.3 M12x1 6g optical area 27.7 6.2 4 E3F2-DS30@4-M1-S 76 65.5 4.8 dia 16.4 dia 64.9 49.3 42.3 37 E3F2-DS30@4-S 4 dia E3F2-DS30@4-M E3F2-R4@4-M E3F2-D1@4-M 24 DC-Switching Models, metal (brass and stainless steel), radial type Cable type Connector type Without potentiometer E3F2-R2R@41-M1-S 76 65.5 42.3 37 13.2 16.4 dia optical area 24 27.7 6.2 24 4.8 dia M12x1.6g optical area 27.7 4 E3F2-R2R@41-M 4.8 dia 4 dia 64.9 42.3 37 E3F2-R2R@41-S 16.4 dia E3F2-R2R@41-M 6.9 Light indicator 4 3.45 Light indicator M18x1 6g M18x1.6g With potentiometer E3F2-DS30@41-M1-M E3F2-DS30@41-M1-S 76 65.5 4.8 dia 37 24 6.9 4 27.7 13.2 13.2 24 optical area 16.4 dia 49.3 42.3 optical area M12x1 6g 4.8 dia 27.7 64.9 49.3 42.3 37 E3F2-DS30@41-S 4 dia 16.4 dia E3F2-DS30@41-M Sensitivity adjustor Light indicator M18x1 6g 6.9 3.45 4 3.45 Sensitivity adjustor Light indicator M18x1 6g AC-Switching Models, plastic, axial type Cable type Without potentiometer E3F2-3Z@ E3F2-R2Z@ E3F2-DS10Z@-N 90 8 67.3 62 5 dia. M18 x 1 6g 24 3.1 Light indicator 16.8 dia. 22 3.1 optical zone Photoelectric Sensors E3F2 19 Accessories (Order Separately) Reflectors E39-R1 E39-R1S E39-R3 29 Two, 3.5 dia. 6 4.5 3.4 40.3 34 3.4 R20 7.5 14 7 7 13.7 18.45 0.2 22.9 20 0.2 11 Adhesive tape side 22.5 59.9 52 8 Material, reflective surface: acrylic Rear surface: ABS 16 19.3 41.8 2.7 1.6 Material, reflective surface: acrylic Rear surface: ABS 2-M3 25.4 Two, 3.2 dia. R25.4 34.8 38 3.4 34 1.2 10.1 2.6 1.2 10 Stainless steel (SUS304) E39-R8 E39-R7 9 7.4 100 92 84 4.5 92 100 for M3 for E39-R40 8.7 84.5 77 77 84.5 for M3 Tape Reflectors E39-RS3 E39-RSA 35 0.6 0.7 10 80 Reflecting surface 4 x R1 70 Adhesive tape E39-RSB 40 0.7 35 4-R1 Adhesive tape side 4 x R1 20 Photoelectric Sensors E3F2 Reflecting surface Adhesive tape Installation Mounting Bracket Y92E-B18 Lens Cap E39-F31 Glass plate Metal rim Gasket E3F2 4 max. 20 dia. Note: Hexagon bolt: M5 x 32 Material: plastic Mounting Bracket Y92E-G18 30 M24x1.5 Two tightening nuts 30 Approx. 35 23.5 20.5 5 Sensor tightening nut 30 30 Slit (for precision detection with E3F2-10@) E39-ES18 16 1 21 4 Photoelectric Sensors E3F2 21 Precautions The E3F2 Photoelectric Sensor is not a safety component for ensuring the safety of people which is defined in EC directive (91/368/ EEC) and covered by separate European standards or by any other regulations or standards. When using the photoelectric sensor in the vicinity of an inverter motor, ensure to connect the protective earth ground wire of the motor to earth. Failure to ground the motor may result in malfunction of the sensor. Degree of protection When you use the photoelectric sensor at temperatures exceeding 45C, the load current must be within the described values as shown in the figure below. Heat shock: The Alternating, fast temperature changes between -25C and +55C are executed for 5 cycles and 1 hour for each temperature. Function and isolation are checked. Water proof: The sensors are submerged alternating in water of +2C and +55C. 20 cycles with 1 hour for each temperature are executed. Function, water tightness and electrical isolation are checked. Do not expose the photoelectric sensor to excessive shock during installation, keeping within IP 67 standards. 130 0 45 55 Operating temperature (C) Installation Wiring If the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photoelectric sensor could be induced to malfunction, or even be damaged by electrical noise. Separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. Do not connect the black wire to the brown wire without a load. Direct connection of these wires may damage the photoelectric sensor (AC switching type). Brown Load Sensor 24 to 240 VAC Black Blue 22 200 Load current (mA) The E3F2 photoelectric sensors have a degree of protection rated with IP67. In this case, the sensors have passed the OMRON heat shock test before the IP67-test of IEC 60529 (submersion at 1m water depth for 30 min). Afterwards the sensors have been tested according to the OMRON waterproof test. Photoelectric Sensors E3F2 Do not exceed a torque of * 2.0 Nm (20 kgf cm) when tightening mounting nuts for plastic models * 20.0 Nm (200 kgf cm) when tightening mounting nuts for metal models Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's pro gramming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Seller's test conditions, and the user must corre late it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made. However, some specifica tions of the Good may be changed without any notice. When in doubt, specia part numbers may be assigned to fix or establish key specifications for you application. Please consult with your Seller's representative at any time to con firm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Photoelectric Sensors E3F2 23 Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron.com/oei - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC OMRON CANADA, INC. OMRON ON-LINE One Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Toronto, Ontario M1B 5V8 847-843-7900 416-286-6465 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.ca For US technical support or other inquiries: 800-556-6766 Cat. No. E224-E3-04 24 04/05 Photoelectric Sensors E3F2 Specifications subject to change without notice Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: E3F2-R2RC41-E2M E3F2-R2RC4-C E3F2-DS10C4-C E3F2-7DB4-M E3F2-7DB4-M 10M E3F2-7DB4-M1-S E3F27DB4-M 5M E3F2-7DB4-S E3F2-7DC4-M E3F2-7DC4-M 10M E3F2-7DC4-M1-M E3F2-7DC4-M1-S E3F2-7DC4-M 5M E3F2-7DC4-S E3F2-7L-M 10M E3F2-7L-M1-M E3F2-7L-M1-S E3F2-7L-M 5M E3F2-7L-S E3F2-R2RB4-M1-M